遥控模型电子配件、通用配件销售平台-模型总动员网
  • 品名
  • 简介
  • 全部
热:FRSKY  云台  2208  乐天  OSD  S900  2814  ACE  4225  Phantom  iOSD  lite  
FPV第一人称,自驾OSD航拍等相关设备!
首页 FPV/OSD/图传/航拍 FPV第一人称设备 无线图传 天线 摄像头 采集设备等
产品编号: FCHUB-6S
说明书:
客户评论:   查看评论.
上架日期: 2018-06-04
最后更新: 2018-06-06
可打印页面  添加到收藏夹
关键词: MATEK  FCHUB-6S  5V&10V  184A  FPV  穿越机  分电板 

MATEK FCHUB-6S 5V&10V 184A FPV 穿越机 分电板

技术参数:
Total 4 pairs ESC solder tabs are fit for X type frame
Max.27V input w/ TVS protection
Built-in current sensor 184A
PDB: 4*30A (4*46A, 5 seconds), 4layers*2oz copper PCB
BEC 5V/1.5A(2A Max) w/ 100uF panasonic POSCAP filter
BEC 10V/1.5A(2A Max.) w/ 47uF TDK MLCC filter
5V & 10V Output LED indicators & Short circuit tolerant
Current Module
- Max.range 184A
- 3.3V ADC
- Scale the output voltage to milliamps(1/10th mV/A): 179
BEC 5V output:
- Designed for RC Receivers, Flight controllers, OSD, and Servos.
- DC/DC synchronous buck regulator.
- Voltage: 5.0 +/- 0.1VDC
- Continuous current: 1.5 Amps (Max.2.0A 10s/minute)
- Short-circuit tolerant (2 seconds/minute)
BEC 10V output:
- Designed for Video TX or FPV camera.
- Voltage: 10.0 +/- 0.2VDC
- Continuous current: 1.5 Amps (Max.2.0A 10s/minute)
- Short-circuit tolerant (2 seconds/minute)
- 10V can be used to power cameras labeled as 12V
- The 3S LiPo input voltage should be 11V plus
Physical:
- Mounting: 30.5 x 30.5mm, Φ3mm
- Dimensions: 36 x 46 x 4 mm
- Weight: 8.5g

附  件:
1 x 分电板
4 x M3*12尼龙螺丝
4 x M3*6+6尼龙柱
8 x M3尼龙螺母
客户评论:

内容描述:
此处评论/问题为客户间交流.

发布为: 评论 问题
推荐星级: