• 品名
  • 简介
  • 全部
无人机、多旋翼、大疆 DJI、云台、电动、油动直升机、直升机配件及辅助设备。
首页 多旋翼/穿越机 多旋翼(2-8旋翼等飞行器) 多旋翼飞控板/控制器
产品编号: F7-PRO
说明书:
客户评论:   查看评论.
上架日期: 2017-07-06
最后更新: 2018-04-28
可打印页面  添加到收藏夹
关键词: 新款  Omini  F7  Pro  飞控  Betaflight  3.2.0固件  内置OSD  BEC 

新款 Omini F7 Pro 飞控 Betaflight 3.2.0固件 / 内置OSD BEC

技术参数:
Features:
- STM32 F745 MCU - faster than the current F3 and F4 processors
- Two gyros on the flight controller: an MPU6000 for sampling up to 8khz and ICM20608 for sampling up to 32khz
- Built in betaflight OSD
- Built in Current sensor
- Built in 5V LC-power filter
- Built in Barometer
- D-shot esc Support(Dshot600 Ready)
- 36x36mm, mount holes 30.5x30.5mm
- Weight: 6.6g
- SD card reader for recording black box data (SD card not included)
- Supports 2-4s natively, 5-6s with 220uf 35V capacitor
- 5v/1A regulator
- Support PPM/SBUS/IBUS/DSM2/DSMX protocol receiver
- LED_strip ready pin headers
- Buzzer ready pin headers
- Smart port ready Pin headers
- Compatible 4 in 1 ESC with JST-SH 1.0 6pin housing
- Firmware version: Betaflight 3.2.0 OmnibusF7


附  件:
1 x 新款 Omini F7 Pro 飞控
4 x 尼龙柱
4 x 螺丝
4 x 螺母
3 x 插针
客户评论:

内容描述:
此处评论/问题为客户间交流.

发布为: 评论 问题
推荐星级: