产品信息: Matek GPS模块 SAM-M8Q / 4-6V
产品信息: Matek GPS模块 SAM-M8Q / 4-6V |
[打印本页] [关闭本页] | ||
| 产品编号: | SAM-M8Q | 产品品牌: | |
| 产品名称: | Matek GPS模块 SAM-M8Q / 4-6V | 产品重量: | |
| 产品类别: | 多旋翼/穿越机 | 产品尺寸: | |
|
特征: |
|
Features - 72-channel u-blox M8 engine GPS L1C/A, SBAS L1C/A, QZSS L1C/A, QZSS L1 SAIF, GLONASS L1OF, Galileo E1B/C - On-board Ultra low noise 3.3V voltage regulator and RF filter for noise blocking - Features an additional front-end LNA for optimized performance and a front-end SAW filter for increased jamming immunity - Build-in embedded GNSS patch antenna, low power consumption - The 15 x 15 mm patch antenna provides the best compromise between the performance of a Right Hand Circular Polarized (RHCP) antenna and a small size to be integrated in any design. |
|
技术参数: |
|
- Input voltage range: 4~6V - Uart (Tx,Rx) interface - Battery for HOT module start - Power LED(Red) & Time pulse LED(Blue) - Baudrate 9600 default - Dimensions: L26 x W16 x H7.5 mm - Weight: 7 gram - Can be easy mounted in your case by double sided tape - Supported by INAV/Betaflight/Ardupilot, ect. Max navigation update rate - Single GNSS up to 18 Hz - 2 Concurrent GNSS(GPS & GLONASS) up to 10 Hz - Horizontal position accuracy(GPS & GLONASS) 2.5 m CEP - Velocity accuracy 0.05m/s Cold start 26 s - Aided cold starts: 2 s - Hot start 1 s Sensitivity - Tracking & Navigation: –165 dBm - Reacquisition: –158 dBm - Cold start: –146 dBm - Hot start: –155 dBm Tips - GPS, GLONASS, SBAS, QZSS are enabled by default - Blue PPS LED blinking(1Hz) means 3D fixed - update rate 1Hz & baudrate 9600 default - Baud 9600~115200 supported by INAV - update rate 5Hz with INAV UBLOX Protocol - update rate 10Hz with INAV UBLOX7 Protocol - BF doesn’t support GPS position hold and RTH, GPS Rescue mode is supported by BF3.5 or last. - The scratches on ceramic antenna are the result of tuning the antenna by ublox. Placing small nicks in the centre of the long edges, or corners, brings them into spec. |
|
附件: |
|
1 x GPS模块 1 x 连接线 |
欢迎光临 模型总动员 (http://www.mxzdy.com/) |